When an object is used for a long time, it will inevitably lead to some damage. Yuba as a winter bathroom bathing artifact is no exception. After a long time of use, there may be some minor problems, such as the Yuba exhaust fan is broken. Today, Xiaobian will tell you how to repair the Yuba exhaust fan.

How to repair the Yuba exhaust fan? First of all, we must first confirm the specific problem of the exhaust fan, we have the right medicine.

1, the motor is broken

Under normal circumstances, it is necessary to remove the inspection before it can be judged. Generally, it is most likely that the motor will not be smothered for a long time. You can turn it by hand and try it. Because it is used too little, it is often in the humid environment of water vapor. As a key component of Yuba, the motor is not directly observable in appearance, so it has long been ignored by consumers. Generally, there will be no major problems in a short period of time, because its main function is ventilation and ventilation. Due to the length of use and the environment, the exhaust fan will cause the shaft to rust and squeak (with a click), and the winding will burn out for a long time (no humming). For safety reasons, it is recommended that you replace the exhaust fan as soon as possible. As for the motor does not turn, basically the resistance type will not cause problems, the problem is on the motor, not the line is broken, or the motor is burnt out. As for the problem of judging the motor or the resistance, it can only be judged by removing the inspection. It can also be removed and added with some lubricant.

2, the exhaust fan has sound

Yuba exhaust fan has sound. Under normal circumstances, there will be no big problem in a short time, because its main function is ventilation and ventilation. Because the exhaust fan is often used in a humid environment for a long time, it will cause the shaft to rust. Stuck.

3, Yuba capacitor is broken

If the capacitor in the Yuba is broken, you need to replace the capacitor. You need to buy a new one in advance, or go directly to a special maintenance person.

4, Yuba motor is broken

If the motor in the Yuba motor is broken, it needs to be repaired.

5, circuit failure

There may be a fault in the installation of the Yuba, the wiring is not connected, or the contact is poor, etc. This needs to be checked after the circuit is repaired.

The above 5 points will cause the Yuba exhaust fan to be broken, so we have to repair the specific situation. After everyone saw this question, is it right? I want to try to see if my fan is bad. Want to know more about Yuba knowledge, please continue to pay attention to GELAN electrical official website.